Skip to main content

CarbonLith

Powder admixture for concrete. Optimise your mix and lower the carbon footprint of every cubic metre while keeping the required performance.

What it is
and how it works

CarbonLith is a powder admixture based on carbon microfibres, designed to optimise concrete mix design. It is added together with the cement, at a dose of only 220 g per m³, and works inside the cement paste as a physical template: it orders the formation of C-S-H gel during hydration and produces a more compact and homogeneous matrix, with a more continuous aggregate–paste bond and fewer microcracks.

That better use of the cement is what lets you optimise your mix: reach the required strength with up to 10% less cement and a smaller CO₂ footprint. It is a physical mechanism, with no added chemical reactions: hydration and setting follow their normal course.

Supply form
Dark grey powder · 20 kg container
Point of addition
With the cement, dry, before the water and liquid admixtures
Mode of action
Physical: the microfibres act as a template for the nucleation of C-S-H gel. It does not alter hydration or setting
Material base
Carbon microfibres (≈10% carbon) on a cementitious carrier

Validated in more than 90 industrial trials · see where it is being used

Composition of CarbonLith
Composition of the material

What the microscope shows

Contact zone between aggregate and paste in an HA-25 concrete, seen under the electron microscope. In the reference, the bond shows discontinuities and voids. With CarbonLith and 10% less cement, the paste wraps the aggregate continuously and compactly.

Electron micrograph of the aggregate–paste contact in the reference concrete: a crack runs along the whole bond
Reference
Electron micrograph of the same contact with CarbonLith and 10% less cement: the paste wraps the aggregate with no voids
With CarbonLith and 10% less cement

Dosage
and compatibility

The final values come from the trial on your own mix. This table sets out the general framework for the product.

20 kg container of CarbonLith
20 kg container

CarbonLith · product data

Packaging
Dark grey powder · 20 kg container (other formats on request)
Dosage
0.22 kg per m³ of concrete (220 g/m³). Dosed by volume of concrete, not by weight of cement
Cement reduction
Up to 10% (about 30–46 kg/m³ in the industrial trials). The exact percentage is set in the trial on your mix. See how it optimises your mix
Validated cements
CEM I, CEM II, CEM III, CEM IV and CEM V, including sulphate-resisting cements
See the types tested

CEM I 52.5 R · CEM II/A-L, II/A-M (P-L), II/B-L, II/B-M (P-LL) and II/B-S 42.5 R · CEM III/A 42.5 N/SR · CEM IV/A (P) 42.5 R · CEM V/A (S-V) 32.5 N/SRC

Types of concrete
Ready-mix, precast and sprayed. Plain, reinforced and prestressed, from HM-20 and HA-30 to HP-70
Point of addition
Together with the cement. Mix until homogeneous before adding water and liquid admixtures. Automatic dosing at the plant
Effect on setting
No appreciable acceleration or retardation of hydration
Compatibility with admixtures
Compatible with common plasticisers and superplasticisers, without affecting their performance
Storage
Closed container, protected from air and moisture, between 5 and 30 °C
Standards
UNE-EN 934-2, Table 2 (water reducer/plasticiser) · CE marking (Regulation (EU) 305/2011) · Declaration of Performance · CE certificate no. 0370-CPR-8020 · Manufactured under ISO 9001 · Verified Environmental Product Declaration (EPD)
Safety
Contains cement: irritating to skin, eyes and respiratory tract. Wear an FFP2 mask, nitrile gloves and goggles. Not dangerous goods for transport (ADR/RID, IMDG, IATA). See the Safety Data Sheet
See the documentation

Documentation

We are finalising the publishable version of the technical documentation. In the meantime, the technical team sends it directly to anyone who asks for it.

Official documentation
Document Availability
Technical data sheet (TDS) On request
Safety Data Sheet (SDS) On request
Declaration of Performance (DoP) On request
CE certificate no. 0370-CPR-8020 On request
Environmental Product Declaration (EPD) On request

Official documentation issued under the trade name CarbonLith Structural.

Request the documentation

Tell us which document you need and for which project. A person from the technical team replies, not an automated inbox.

Request by email

Every batch,
fully traceable

CarbonLith is manufactured at our plant in Noblejas (Toledo) under an ISO 9001 quality system and factory production control certified by a notified body. Every batch leaves identified and documented, and we install and calibrate the equipment that doses it at your plant ourselves. You know what goes into every cubic metre.

01 · Manufacturing

Made in Noblejas

In-house production under an ISO 9001 quality management system, with a specified composition (9.9–10.4% carbon).

02 · Certification

External control

Factory production control certified by Applus+ as a notified body (certificate no. 0370-CPR-8020). CE marking and Declaration of Performance according to UNE-EN 934-2.

03 · Batch

Every container, identified

Batch number, quantity and packing date on the label of every container.

04 · Dosing

Calibrated at your plant

Automatic dosing unit installed and calibrated by Nanomate, integrated into the plant's usual process: the 220 g/m³ dose goes into every batch.

Label on a CarbonLith container showing the batch number, quantity and packing date
Batch label · traceability per container
Detail of the Nanomate dosing unit installed next to a plant's silos
CarbonLith dosing unit installed at a plant
  • CE marking
  • ISO 9001
  • Verified EPD

How much cement can you take out?

The answer comes from a trial on your mix. It starts with a conversation.

Talk to an engineer