CarbonLith
Powder admixture for concrete. Optimise your mix and lower the carbon footprint of every cubic metre while keeping the required performance.
What it is
and how it works
CarbonLith is a powder admixture based on carbon microfibres, designed to optimise concrete mix design. It is added together with the cement, at a dose of only 220 g per m³, and works inside the cement paste as a physical template: it orders the formation of C-S-H gel during hydration and produces a more compact and homogeneous matrix, with a more continuous aggregate–paste bond and fewer microcracks.
That better use of the cement is what lets you optimise your mix: reach the required strength with up to 10% less cement and a smaller CO₂ footprint. It is a physical mechanism, with no added chemical reactions: hydration and setting follow their normal course.
- Supply form
- Dark grey powder · 20 kg container
- Point of addition
- With the cement, dry, before the water and liquid admixtures
- Mode of action
- Physical: the microfibres act as a template for the nucleation of C-S-H gel. It does not alter hydration or setting
- Material base
- Carbon microfibres (≈10% carbon) on a cementitious carrier
Validated in more than 90 industrial trials · see where it is being used
What the microscope shows
Contact zone between aggregate and paste in an HA-25 concrete, seen under the electron microscope. In the reference, the bond shows discontinuities and voids. With CarbonLith and 10% less cement, the paste wraps the aggregate continuously and compactly.
Dosage
and compatibility
The final values come from the trial on your own mix. This table sets out the general framework for the product.
CarbonLith · product data
- Packaging
- Dark grey powder · 20 kg container (other formats on request)
- Dosage
- 0.22 kg per m³ of concrete (220 g/m³). Dosed by volume of concrete, not by weight of cement
- Cement reduction
- Up to 10% (about 30–46 kg/m³ in the industrial trials). The exact percentage is set in the trial on your mix. See how it optimises your mix
- Validated cements
- CEM I, CEM II, CEM III, CEM IV and CEM V, including sulphate-resisting cements
See the types tested
CEM I 52.5 R · CEM II/A-L, II/A-M (P-L), II/B-L, II/B-M (P-LL) and II/B-S 42.5 R · CEM III/A 42.5 N/SR · CEM IV/A (P) 42.5 R · CEM V/A (S-V) 32.5 N/SRC
- Types of concrete
- Ready-mix, precast and sprayed. Plain, reinforced and prestressed, from HM-20 and HA-30 to HP-70
- Point of addition
- Together with the cement. Mix until homogeneous before adding water and liquid admixtures. Automatic dosing at the plant
- Effect on setting
- No appreciable acceleration or retardation of hydration
- Compatibility with admixtures
- Compatible with common plasticisers and superplasticisers, without affecting their performance
- Storage
- Closed container, protected from air and moisture, between 5 and 30 °C
- Standards
- UNE-EN 934-2, Table 2 (water reducer/plasticiser) · CE marking (Regulation (EU) 305/2011) · Declaration of Performance · CE certificate no. 0370-CPR-8020 · Manufactured under ISO 9001 · Verified Environmental Product Declaration (EPD)
- Safety
- Contains cement: irritating to skin, eyes and respiratory tract. Wear an FFP2 mask, nitrile gloves and goggles. Not dangerous goods for transport (ADR/RID, IMDG, IATA). See the Safety Data Sheet
Documentation
We are finalising the publishable version of the technical documentation. In the meantime, the technical team sends it directly to anyone who asks for it.
| Document | Availability |
|---|---|
| Technical data sheet (TDS) | On request |
| Safety Data Sheet (SDS) | On request |
| Declaration of Performance (DoP) | On request |
| CE certificate no. 0370-CPR-8020 | On request |
| Environmental Product Declaration (EPD) | On request |
Official documentation issued under the trade name CarbonLith Structural.
Request the documentation
Tell us which document you need and for which project. A person from the technical team replies, not an automated inbox.
Request by emailEvery batch,
fully traceable
CarbonLith is manufactured at our plant in Noblejas (Toledo) under an ISO 9001 quality system and factory production control certified by a notified body. Every batch leaves identified and documented, and we install and calibrate the equipment that doses it at your plant ourselves. You know what goes into every cubic metre.
01 · Manufacturing
Made in Noblejas
In-house production under an ISO 9001 quality management system, with a specified composition (9.9–10.4% carbon).
02 · Certification
External control
Factory production control certified by Applus+ as a notified body (certificate no. 0370-CPR-8020). CE marking and Declaration of Performance according to UNE-EN 934-2.
03 · Batch
Every container, identified
Batch number, quantity and packing date on the label of every container.
04 · Dosing
Calibrated at your plant
Automatic dosing unit installed and calibrated by Nanomate, integrated into the plant's usual process: the 220 g/m³ dose goes into every batch.
- CE marking
- ISO 9001
- Verified EPD
How much cement can you take out?
The answer comes from a trial on your mix. It starts with a conversation.