Skip to main content

Decarbonising concrete pays off

With CarbonLith, optimise your mix and reduce the CO₂ footprint of your concrete without compromising strength.

20 kg container of CarbonLith
Eduardo Torroja Institute (IETcc-CSIC) LOEMCO Applus+ CE marking

Nanomate's own plant · Noblejas, Toledo

Optimise your mix Lower carbon footprint Does not affect setting Made in Spain

CarbonLith

A powder admixture dosed together with the cement. What changes is your mix's efficiency and its footprint, not its performance.

  • Optimise your mix

    Up to 10% less cement while keeping the required strength. Validated in more than 90 industrial trials, in reinforced and prestressed concrete (HA and HP) with CEM I to CEM V cements.

  • 17 kg CO₂/m³ lower footprint

    Every kilo of cement taken out of the mix is CO₂ that is not emitted. Compared with an HA-30 control mix with 300 kg/m³ of the same cement (CEM II/A-M 42.5 R).

  • Densification of the cement matrix

    A more compact matrix with fewer pores, even with 10% less cement. Under the microscope, the aggregate–paste bond is continuous and has fewer microcracks.

  • Reduced water penetration

    With 10% less cement, water penetration under pressure drops from 28 to 15 mm (maximum, −46%) and from 16 to 6 mm (average, −62%), in an HA-40 with 360 kg of cement/m³. Less water and fewer aggressive agents inside the concrete: a better basis for durability.

  • Higher early strength

    Higher strength at 1, 2 and 7 days, even with 10% less cement. In the laboratory, +27% at 2 days and +37% at 7 days; at a plant, an HP-50 with CEM I 52.5 R went from 32.9 to 39.8 MPa at 1 day.

  • Compatibility with CEM I - V from all manufacturers

    Tested from CEM I to CEM V, with cements, aggregates and admixtures from different sources, in more than 90 industrial validations in Spain and Portugal. Compatible with plasticisers and superplasticisers.

Lower footprint,
same concrete

4,000t

Tonnes of CO₂ avoided to date

Internal estimate as of [DATA: date], based on [DATA: m³ dosed] m³ dosed and 17 kg CO₂e/m³.

17kg CO₂/m³

Compared with an HA-30 control mix with 300 kg/m³ of the same cement (CEM II/A-M 42.5 R).

~9%

Footprint reduction per cubic metre of concrete.

How it optimises
your mix

The performance of your mix and its carbon footprint depend almost entirely on one component: cement. CarbonLith makes every kilo go further.

01 · Addition

Goes in with the cement

220 g are dosed per m³ of concrete, together with the cement and before the water and liquid admixtures. We install an automatic dosing unit at the plant, integrated with its control system, which adds it to every batch.

02 · Structure

Orders the matrix from within

The carbon microfibres act as a template for the formation of C-S-H gel. The matrix grows more compact and homogeneous, and the aggregate–paste bond becomes more continuous. It is a physical effect: calorimetry shows no change in hydration, even at five times the dose.

03 · Result

Less cement per cubic metre

The mix reaches the required strength with up to 10% less cement: between 30 and 46 kg/m³ in the industrial trials, in HA and HP concrete with CEM I to CEM V cements. The exact reduction is validated on your mix.

Real example. HA-30 in Galicia with CEM II/B-L 42.5 R and 10% less cement (−34 kg/m³): 43.8 MPa at 28 days, against 43.7 MPa for the reference.

See the data sheet

Automated.

  • DS500 dosing unit. Designed in-house by Nanomate, optimised for CarbonLith.
  • Adaptable to any plant. Our team of expert engineers makes sure the installation is flawless.
  • SCADA integration.
  • Speed. You can be dosing CarbonLith within three weeks.
  • 400kg

    capacity

  • ~1,800m³

    per load

  • Precision

    adjusted to each mix

See the dosing unit
Nanomate DS500 dosing unit installed at a concrete batching plant
DS500 dosing unit installed at a customer's plant

Talk to
an engineer

If you want to know how far you can optimise your mix and how much footprint you avoid, the quickest route is a trial with your own cement and your own aggregates. Tell us what concrete you produce and someone from the technical team will reply.

For now, we only distribute CarbonLith in Spain.

Phone
636 635 144
Plant
Ctra. de Ocaña, km 29, 45350 Noblejas (Toledo)
Offices
C/ Claudio Coello 28, 2º dcha., 28001 Madrid
A company address is best: the reply comes from the technical team.
If you tell us the cement type, target strength and volume, we can give you a much more specific answer.

By sending, you accept the privacy policy [DATA: link to the privacy policy].